8-57
2. Lift the cargo bed up. (See pages 4-20–
4-21 for cargo bed lifting and lowering
procedures.)
3. Remove the panel (panel A or B).
4. Remove the bulb holder (together with
the bulb) by turning it counterclockwise.
1. Tail/brake light bulb holder
5. Push the defective bulb in and turn it
counterclockwise to remove it from the
bulb holder.
6. Push a new bulb in and turn it clockwise
to install in the bulb holder.
7. Reinstall the bulb holder (together with
the bulb) by turning it clockwise.
8. Install the panel.
9. Lower the cargo bed.
10. Reinstall the quick fastener screws and
bolts, and then tighten the bolts to the
specified torque.
Tightening torque:
Panel bolt:
7 Nm (0.7 m·kgf, 5.1 ft·lbf)
EE.book Page 57 Thursday, September 6, 2007 4:28 PM
Summary of Contents for YXR70FX
