E-
4
INPUT1
FROM AMPLIFIER
OUTPUT
TO SPEAKERS
INPUT2
/MONO
AUTO
STANDBY
OFF
LOW
HIGH
LOW
HIGH
HIGH CUT
OFF
POWER
ON
VOLUME
0
10
SPLIT SUBWOOFER
SUBWOOFER
(
LOW PASS
)
INPUT2
/MONO
CONNECTIONS
Caution: Plug in the subwoofer and other components after all connections are completed.
●
All connections must be correct, that is to say
L
(left) to
L
,
R
(right) to
R
, “
+
” to “
+
” and “
–
” to “
–
”. Also refer to the owner’s
manual for each of your components.
●
Basically, connect the subwoofer to the line output (pin jack) terminal(s) of the amplifier. (Refer to pages 4 and 5 for details.)
If your amplifier does not have any line output terminal, connect the subwoofer to the speaker output terminals of the
amplifier. (Refer to pages 6 and 7 for details.)
Left main
speaker
Right main
speaker
Subwoofer
Amplifier
To AC outlet
Connecting to line output (pin jack) terminals of the amplifier
●
To connect with a YAMAHA DSP amplifier (or AV
receiver), connect the SUBWOOFER (or LOW PASS etc.)
terminal on the rear of the DSP amplifier (or AV receiver)
to the
L
/MONO INPUT2 terminal of the subwoofer.
䡵
Using one subwoofer
Connect the main speakers to the speaker output terminals of the amplifier.
●
When connecting the subwoofer to the SPLIT
SUBWOOFER terminals on the rear of the DSP amplifier,
be sure to connect the
L
/MONO INPUT2 terminal to the
“L” side and the
R
INPUT2 terminal to the “R” side of the
SPLIT SUBWOOFER terminals.
