2. STARTING THE USB PORT OPERATION CHECK
The USB port operation check is using the USB Compliance check Test Tool Version 2.6. Install the this Test Tool.
Running the Test Tool.
↓
[PLUG IN DEVICE (S) TO TEST!] display.
Fig. 15
↓
Connect the USB cable to the USB port of the personal computer.
↓
Pulg in the USB cable from Personal to [USB INPUT] on the rear panel
of the Subwoofer. (See Fig. 16)
Plug in the
USB Cable from the
Personal Computer.
Fig. 16
↓
Start the USB port operation check.
13
YST-MS50/YST-MS55D
YST-MS55D
Rear panel of the Subwoofer
