background image

 

E-

 

1

 

Cautions

 

Please read the following operating precautions before use:

• When you disconnect the AC adaptor from the AC 

receptacle, hold the plug, not the cord.

• If you plan not to use the YST-M40s for a while, 

disconnect the AC adaptor from the AC receptacle.

• Always disconnect the AC adaptor from the AC 

receptacle before making any connections.

• The YST-M40s do not contain any user serviceable 

parts. Refer all servicing to your Yamaha dealer.

 

Never open the cabinet.

 

 If a foreign object drops 

into the set, contact your dealer, and do not use the 
YST-M40s. Otherwise, you may cause a fire.

• Do not expose the YST-M40s to temperature 

extremes, direct sunlight, excessive dust, humidity, 
or vibration.

• Position the YST-M40s on a level, stable surface. 

Do not drop the YST-M40s, apply excessive force 
to their controls, or put heavy items on top of them.

• Do not place small metal objects on the speakers. 

Otherwise, the object may fall, possibly causing an 
injury.

• Do not obstruct the port with your hand or a for-

eign object.

• To protect the YST-M40 speakers, avoid micro-

phone feedback, continuous and excessive output 
from electronic musical instruments, and excessive 
signal distortion.

• If the YST-M40s are located close to fluorescent or 

neon lights, a slight hum may be heard. In this 
case, relocate the YST-M40s away from the light.

• Although the YST-M40 speakers are magnetically 

shielded, keep floppy disks and tapes away from 
them.

• The YST-M40s may cause picture distortion when 

located close to a television or computer monitor. 
In this case, move them away a short distance.

• Avoid sources of hum (transformers, motors). To 

prevent fire or electrical shock, do not expose to 
rain and water.

• Do not use force on switches, knobs, or cables. 

When you move the YST-M40, first turn off the 
power to the speakers, then disconnect the AC 
adaptor from the AC receptacle and the cables 
from the connected devices.

• Always turn the volume control counterclockwise 

to the minimum before starting to play the audio 
source: increase the volume gradually to an appro-
priate level after the playback has started.

 

Table of Contents

 

Cautions .....................................................................1

Introducing the YST-M40 Speaker System............2

Controls & Connectors.............................................3

Troubleshooting ........................................................4

Non skid pad ..............................................................4

Specifications .............................................................5

Summary of Contents for YST-M40










Reviews: