63
En
MANUAL SETUP
AD
V
ANCED
OPERA
T
ION
English
Use to manually adjust various parameters related to the
sound output.
SET MENU
→
MANUAL SETUP
→
SOUND MENU
■
TONE CONTROL (Tone control)
You can adjust the tonal quality of the sound beams.
TREBLE (Treble)
Use to adjust the high frequency response.
Choices: –12 dB to +12 dB
Initial setting: 0 dB
BASS (Bass)
Use to adjust the low frequency response.
Choices: –12 dB to +12 dB
Initial setting: 0 dB
■
SUBWOOFER SET (Subwoofer set)
Use to manually adjust various subwoofer settings.
BASS OUT (Bass out)
Low-frequency (bass) signals can be directed to the
subwoofer and/or the front left and right channels. This
setting also determines the routing of LFE (low-frequency
effect) signals found in Dolby Digital or DTS sources.
Choices: SWFR (subwoofer),
FRONT
• Select SWFR if you connect a subwoofer. LFE and
low-frequency signals from other channels are directed
to the subwoofer.
• Select FRONT if you do not use a subwoofer. LFE and
low-frequency signals from other channels are directed
to the front left and right channels.
CROSS OVER (Cross over)
When BASS OUT is set to SWFR, you can use this
feature to select a cross-over (cut-off) frequency for all
low-frequency signals. All frequencies below the selected
frequency will be sent to the subwoofer speaker position.
Choices: 80Hz,
100Hz
, 120Hz
LFE LEVEL (Low-frequency effect level)
Select to adjust the output level of the LFE (low-frequency
effect) channel according to the capacity of your
subwoofer. The LFE channel carries low-frequency
special effects which are only added to certain scenes.
This setting is effective only when this unit decodes Dolby
Digital or DTS signals.
Choices: –20 to
0
dB
DISTANCE (Distance)
Select to adjust the distance of the subwoofer from the
listening position.
Choices: 0.3 m (1.0 ft) to 15.0 m (50.0 ft)
Initial setting: 3.0 m (10.0 ft)
SOUND MENU
A)TONE
CONTRO
L
B)SUBWOOFER
SET
C)MUTE
LEVE
L
D)AUDIO
DELAY
E)ROOM
EQ
F
)DD/DTS
Dynamic Range
[ ]/[ ]:Up/Down
[ENTER]:Enter
1
)
SOUND MENU
.
p
p
-
+
TREBLE
;;;;;
0dB
-
+
BASS
;;;;;;;
0dB
[ ]/[ ]:Up/Down [ ]/[ ]:Sel
[ENTER]:Return
A)TONE CONTROL
p
p
.
p
p
------
------
BASS OUT
;;;;;
FRONT
CROSS OVER
;;;
100Hz
LFE LEVEL
;;;;;;
0dB
DISTANCE
;;;;;;
3.0m
[ ]/[ ]:Up/Down [ ]/[ ]:Sel
[ENTER]:Return
B)SUBWOOFER SET
p
p
.
p
p
01EN_YSP-900_UAB_EN.book Page 63 Thursday, February 22, 2007 2:07 PM
