17
En
Connections
PREP
ARA
TION
English
■
Cables used for connections
HDMI cable
Audio pin cable (supplied)
Optical cable (supplied)
Digital audio pin cable (supplied)
Subwoofer pin cable
System connector cable
OSD video pin cable (supplied)
■
Notes on connecting the optical cable
•
Pull out the cap before connecting the optical cable.
When you are not using the optical cable, be sure to put
the cap back in place.
•
When inserting the cable into the optical digital jack,
make sure the direction is correct.
■
Information on HDMI™
Audio signals
• When CPPM copy-protected DVD audio is played back, video and
audio signals may not be output depending on the type of DVD player.
• This unit is not compatible with HDCP-incompatible HDMI or
DVI components.
y
• We recommend that you use an HDMI cable shorter than 5 m
(16 ft) with the HDMI logo printed on it.
• Use a conversion cable (HDMI jack
↔
DVI-D jack) to connect
this unit to other DVI components.
■
Priority order for audio input signals
When multiple types of audio signals are simultaneously
being input from a single source component, this unit
plays back the audio signals in the following priority
order: HDMI
→
Digital
→
Analog
As default settings, the following input jacks are assigned
to the corresponding input sources:
This unit is compatible with 2-channel PCM signals, but not with
multi-channel PCM signals.
Before connecting components
Audio/Video
Audio
Video
A
(White)
(Red)
(White)
(Red)
(Orange)
(Orange)
5
(Yellow)
(Yellow)
Cap
Input source
Audio signal type
DVD video
Dolby Digital, DTS, PCM
DVD audio
2-channel stereo
(up to 96 kHz/24 bit)
Blu-ray Disc
HD DVD
Dolby Digital, DTS, PCM
Notes
Input
jack
Input
source
HDMI
Digital
Analog
TV/STB
✔
✔
DVD
✔
✔
AUX
✔
✔
VCR
✔
Note
Summary of Contents for YSP-600
Page 543: ......