YSP-1000
17
YSP-1000
3. PCのDSP̲FLASHER(YSP).exeを立ち上げます。
すると下記の画面が表示されます。
3. Start up DSP_FLASHER(YSP).exe, the screen will
appear as shown below.
Writing of DSP
1. Install DSP_FLASHER(YSP).exe into the PC.
2. Before turning on the power to YSP-1000 and PC,
connect between RS232C ports with the RS232C cable
(cross cable). (Fig. 1)
DSPの書き込み
1. PCにDSP̲FLASHER(YSP).exeをインストールしま
す。
2. Y S P - 1 0 0 0 とP C の電源を入れる前に、それぞれの
RS232Cポート間をRS232Cケーブル(クロスケーブル)
で接続します。(Fig. 1)
7. プログラムの送信が終了すると、以下の画面が表示され
ます。
[OK]ボタンを押して完了します。
7. When the program transmission is completed, the
screen appears as shown below.
The press the [OK] button to end the procedure.
8. Disconnect the power cable of YSP-1000 from the AC
outlet.
8. YSP-1000の電源コードをACコンセントから抜きま
す。
Summary of Contents for YSP 1000 - Digital Sound Projector Five CH Speaker
Page 60: ...YSP 1000 60 MEMO MEMO ...