3-6
Before operation
3.
If the transmission (HST) oil level is below the min-
imum level mark, refill the recommended oil up to
the specified level (See page 5-7).
Checking the auger
Check the auger for bending or deformation or the exis-
tence of any foreign objects.
Checking the handlebar for looseness or play
Hold the handlebar and check it for any looseness or
play by moving it left and right.
If any looseness or play is found, consult a Yamaha
dealer.
Checking the starter motor operation
Turn the engine switch key to the “START ” position,
and make sure that the starter motor cranks the engine
normally.
Checking the engine for poor starting or
abnormal noise
Make sure that the engine starts immediately, and that
it cranks the engine smoothly. Also, check that no
abnormal noises are coming from the engine.
Checking the exhaust system
After starting the engine, check the exhaust system for
any abnormalities.
Recommended transmission (HST) oil:
Diesel engine oil
SAE 10W-30, Class CD or higher
1
1. Auger
7XE-28199-U6-E0.book 6 ページ ２０２０年５月１日 金曜日 午後３時４３分
