PERIODIC MAINTENANCE AND ADJUSTMENT
6-20
6
EAUS1402
Replacing the headlight bulb
If the headlight bulb burns out, replace
it as follows.
NOTICE
ECA10650
Take care not to damage the follow-
ing parts:
●
Headlight bulb
Do not touch the glass part of
the headlight bulb to keep it free
from oil, otherwise the transpar-
ency of the glass, the luminosity
of the bulb, and the bulb life will
be adversely affected. Thor-
oughly clean off any dirt and fin-
gerprints on the headlight bulb
using a cloth moistened with al-
cohol or thinner.
●
Headlight lens
Do not affix any type of tinted
film or stickers to the headlight
lens.
Do not use a headlight bulb of a
wattage higher than specified.
NOTICE
ECA10670
It is advisable to have a Yamaha
dealer perform this job.
1. Place the scooter on the center-
stand.
2. Remove cowling A. (See page
3. Disconnect the headlight coupler.
4. Remove the headlight bulb cover.
5. Unhook the headlight bulb holder,
and then remove the burnt-out
bulb.
1. Do not touch the glass part of the bulb.
1. Cowling
2. Headlight coupler
3. Auxiliary light lead connector (if equipped)
1. Headlight bulb cover
U2DKE0E0.book Page 20 Wednesday, January 9, 2013 9:19 AM
