18
En
USEFUL OPERATION
You can change various settings of this unit using the
setup menu.
1
Press SETUP to enter the setup menu.
“1:SP LEVEL” is displayed in the front panel
display.
2
Press
/
to select menu and press
ENTER.
Repeat this procedure until desired menu/sub menu is
displayed.
3
Press
/
to adjust the value of each
menu.
Press and hold
/
to change the setting value
faster.
4
Press SETUP again to exit the setup menu.
y
• Press RETURN or
to return to the previous menu.
• Press
to enter the next menu.
If you do not operate within 30 seconds after entering the setup
menu, the unit automatically exits the setup menu.
Setup menu
Setup menu list
Menu
Sub menu
Features
Page
1:SP LEVEL
1-1:FRONT L
Adjusting the volume balance with test tone
1-2:FRONT R
1-3:CENTER
1-4:SURROUND L
1-5:SURROUND R
1-6:SUBWOOFER
2:TONE CONTROL
2-1:BASS
Adjusting high/low frequency sound (tone control)
2-2:TREBLE
3:HDMI SETUP
3-1:CONTROL
Configuring the HDMI settings
3-2:AUDIO
4:DISPLAY MODE
Changing the brightness of the front panel display
5:SP SETUP
5-1:SP CHANNEL
Selecting the number of channel
5-2:SP TYPE
Changing the setting of the speaker type
5-3:SP DISTANCE
Setting the distance between the speakers
5-4:CROSSOVER
Cutting the crossover register
6:FIRMWARE
6-1:VERSION
Displaying the firmware version of this unit
6-2:USB UPDATE
Updating the firmware of this unit
7:D.RANGE
Adjusting the dynamic range
8:MATRIX DECODE
8-1:DECODE MODE
Selecting the decoder
8-2:C.IMAGE
Adjusting the center image
Basic procedure
ENTER
SETUP
/
RETURN
Note