Yamaha YHT-S300, Quick Reference Manual

Page: 8 / 80

6
En
PLAYBACK
Once you have finished all cable connections and remote control operation, follow the procedure below to start basic
playback operation.
1
Press .
This system is turned on and the STATUS indicator
lights green.
y
This system has the auto-sleep function, which will
automatically switch the system to turn off if the system is
left turned on for 24 hours without any operation being
performed.
2
Press one of the input buttons to select an
input source.
3
Start playback on the selected external
component.
For information on the external component, refer to
the instruction manual for the product.
4
Press
/–
to adjust the volume
level.
y
To turn off the volume temporarily, press MUTE . While the
mute function is activated, the VOLUME indicator flashes.
To resume the volume, press
MUTE again or press
/– .
When sound of HDMI is output from the TV, the volume
level does not change if you press
/– .
■
Using the remote control
Basic playback operation
1
2
4
Note
Press again to set the system to standby
mode.
When the “HDMI CONTROL” is set to “ON”, the
STATUS indicator lights red. When the “HDMI
CONTROL” is set to “OFF”, the STATUS indicator
turns off.
Within 6 m
Use the remote control within 6 m of the
subwoofer integrated receiver and point it toward
the remote control sensor.
• Be careful not to spill liquid on the remote control.
• Be careful not to drop the remote control.
• Do not leave the remote control in a place that is:
– hot or humid, such as near a heater or in a bathroom
– extremely cold
– dusty
Notes