8
En
If this product doesn’t work as expected, look for a possible cause below. If the issue you are experiencing is not listed, or you cannot
resolve it after reading through these instructions, disconnect the power cable and contact an authorized Yamaha dealer or service
center.
■
Subwoofer (NS-SW280)
■
Surround speakers (NS-B285)
Type
........................................... Full-range acoustic-suspension
non-magnetic shielding type
Driver
............................................ 6.5 cm (2-1/2") cone speaker
Nominal input power
......................................................... 30 W
Maximum input power
...................................................... 80 W
Impedance
............................................................................... 6 Ω
Frequency response
........................................... 110 Hz–40 kHz
Sensitivity
........................................................81 dB/2.83 V, 1 m
Dimensions (W × H × D)
90 × 90 × 109 mm (3-1/2" × 3-1/2" × 4-1/4")
(without stand)
90 × 120 × 123 mm (3-1/2" × 4-3/4" × 4-7/8")
(with stand)
Weight
........................................0.45 kg (1 lbs.) (without stand)
■
Front/center speaker (NS-BR300)
Type
........................................... Full-range acoustic-suspension
non-magnetic shielding type
Driver
....................... 4 × 10 cm (1-1/2 × 4 in) cone speaker ×3
Frequency response
........................................ 150 Hz to 20 kHz
Impedance
............................................................................... 6 Ω
Dimensions (W × H × D)
NS-BR300 ........... 800 × 50 × 70 mm (31-1/2" × 2" × 2-3/4")
Stand ................. 45 × 70 × 88 mm (1-3/4" × 2-3/4" × 3-1/2")
Weight
...................................................................... 1.5 kg (3 lbs.)
■
Subwoofer (NS-SW280)
Type
........................ Advanced Yamaha Active Servo Technology
Driver
...............................................16 cm (6-1/2") cone woofer
non-magnetic shielding type
Output power
........................ 50 W (100 Hz, 5 Ω, 10% T.H.D.)
Dynamic power
......................................................... 100 W, 5 Ω
Input impedance
....................INPUT (1P RCA pin jack): 10 kΩ
Frequency response
.............................................30 Hz–160 Hz
Input sensitivity
............................. INPUT (1P RCA pin jack):
80 mV (50 Hz, 50 W/5 Ω)
Power supply
U.S.A. and Canada models ...........................AC 120 V, 60 Hz
Australia model..............................................AC 240 V, 50 Hz
U.K. and Europe models...............................AC 230 V, 50 Hz
Dimensions (W × H × D)
........................262 × 264 × 316 mm
(10-3/8" × 10-3/8" × 12-1/2")
Weight
................................................................. 6.9 kg (15.2 lbs.)
Specifications are subject to change without notice.
Troubleshooting
Issue
Possible cause
Remedy
There’s no sound.
The speaker cables are not
connected properly.
Make sure the speaker cables are connected properly.
The sound is very quiet.
The speaker cables are not
connected properly.
Make sure the speaker cables are connected properly:
L (left) to L, R (right) to R, “+” to “+” and “–” to “–”.
Issue
Possible cause
Remedy
The POWER switch is set to ON but
the subwoofer doesn’t work.
The power cable is not connected
properly.
Set the POWER switch to OFF, then make sure the power
cable is connected properly.
There’s no sound.
The VOLUME control is set to 0.
Turn up the VOLUME control.
The subwoofer cable is not
connected properly.
Make sure the subwoofer cable is connected properly.
The subwoofer is too quiet.
The source material doesn’t
contain much bass.
Try playing source material that contains more bass.
Bass sounds are being cancelled
out by standing waves.
Reposition the subwoofer, or break up parallel wall surfaces
by placing bookshelves or other large objects along the wall.
Specifications
