8-32
8
Cable length “A” should measure 47–51 mm
(1.85–2.01 in). Adjust the parking brake free play
as follows.
1. Release the parking brake by moving the
parking brake lever to the right.
2. Fully loosen the locknut and the adjusting bolt
at the rear brake caliper.
3. Slide the rubber cover back at the brake ca-
ble.
4. Loosen the locknut.
5. Turn the parking brake free play adjusting nut
in direction (a) to increase the cable length,
and in direction (b) to decrease it.
TIP
If the cable length cannot be adjusted to specifi-
cation, consult a Yamaha dealer.
6. Tighten the locknut on the brake cable.
7. Slide the rubber cover to its original position.
8. Turn in the adjusting bolt at the rear brake cal-
iper until it feels tight, then turn it out 1/8 turn
and tighten its locknut to the specified torque.
1. Adjusting bolt
2. Cable length “A”
3. Locknut
1
2
3
1. Locknut
2. Parking brake free play adjusting nut
3. Rubber cover
1
2
3
(b)
(a)
UBW260E0.book Page 32 Thursday, May 12, 2016 2:28 PM
Summary of Contents for YFZ45YSXH
Page 18: ...1 8 1 For Oceania 4 6 1 2 6 5 3 UBW260E0 book Page 8 Thursday May 12 2016 2 28 PM...
Page 68: ...7 1 7 EBU21142 RIDING YOUR ATV UBW260E0 book Page 1 Thursday May 12 2016 2 28 PM...
Page 150: ...11 2 11 1 Model label 1 UBW260E0 book Page 2 Thursday May 12 2016 2 28 PM...
Page 153: ...UBW260E0 book Page 3 Thursday May 12 2016 2 28 PM...