manualshive.com logo in svg

Yamaha YFZ450RSSE, Owner'S Manual

The Yamaha YFZ450RSSE Owner's Manual is a comprehensive guide that provides detailed instructions and essential information for operating and maintaining your high-performance ATV. Download this manual for free from our website and unleash the full potential of your Yamaha YFZ450RSSE.

Share
Download
background image

10-1

10

EBU25962

SPECIFICATIONS

Dimensions:

Overall length:

1795 mm (70.7 in)

Overall width:

1240 mm (48.8 in)

Overall height:

1065 mm (41.9 in)

Seat height:

810 mm (31.9 in)

Wheelbase:

1270 mm (50.0 in)

Ground clearance:

235 mm (9.3 in)

Minimum turning radius:

3600 mm (142 in)

Weight:

Curb weight:

184.0 kg (406 lb)

Noise and vibration level:

Noise level (77/311/EEC):

85.9 dB(A)@3750 r/min (EUR)(FRA)(GBR)

A-weighted sound power level:

99.0 dB(A)@3750 r/min (EUR)(FRA)(GBR)

Vibration on seat (EN1032, ISO5008):

Will not exceed 0.5 m/s² (EUR)(FRA)(GBR)

Vibration on handle (EN1032, ISO5008):

Will not exceed 2.5 m/s² (EUR)(FRA)(GBR)

Engine:

Engine type:

Liquid cooled 4-stroke, DOHC

Cylinder arrangement:

Single cylinder

Displacement:

449 cm³

Bore 

×

 stroke:

95.0 

×

 63.4 mm (3.74 

×

 2.50 in)

Compression ratio:

11.8 : 1

Starting system:

Electric starter

Lubrication system:

Dry sump

Engine oil:

Recommended brand:

YAMALUBE

U1TD6AE0.book  Page 1  Wednesday, January 8, 2014  8:46 AM

Summary of Contents for YFZ450RSSE



























































































































































Reviews:

No comments

Related manuals for YFZ450RSSE

Brands by name

Popular brands

Load more brands