Yamaha YFM80GV, Owner'S Manual

Page: 82 / 116

1
1. Drain bolt
8-6
Engine oil replacement
1. Place the ATV on a level surface.
2. Warm up the engine for several minutes
and stop it.
3. Place a container under the engine.
4. Remove the dipstick and drain bolt to drain
the oil.
5. Inspect the O-ring and replace if damaged.
6. Install the drain bolt and tighten to specifi-
cation.
7. Fill the engine with oil and install the dip-
stick.
c C
Be sure no foreign material enters the
crankcase.
8. Warm up the engine for several minutes at
idle speed. Check for oil leakage while
warming up.
c C
If oil leakage is found, stop the engine imme-
diately and check for the cause.
Recommended oil type:
20W50, 20W40, 15W40, 10W40,
10W30, 5W30
Recommended oil classification:
API Service SE, SF, SG type or higher
Oil quantity:
Periodic oil change:
0.8 L
Tightening torque
Drain bolt:
20 Nm (2.0 m
0
kgf)
2D3-9-20 8 3/11/05 10:31 AM Page 5