manualshive.com logo in svg

Yamaha YFM7FGX, Owner'S Manual

Share
Download
Yamaha YFM7FGX Owner'S Manual Download Page 136

8-43

8

NOTE:

If water drains from the V-belt case after removing
the plug, have a Yamaha dealer check the ATV as
the water may affect other engine parts.

EBU27310

Adjusting the engine idling speed 

The engine idling speed must be checked and, if
necessary, adjusted as follows at the intervals
specified in the periodic maintenance and lubrica-
tion chart.

NOTE:

A diagnostic tachometer is needed to make this
adjustment.

1. Start the engine and warm it up.

NOTE:

The engine is warm when it quickly responds to the
throttle.

2. Remove panel C. (See page 8-8.)
3. Attach the tachometer to the spark plug lead.
4. Check the engine idling speed and, if neces-

sary, adjust it to specification by turning the
idle adjusting screw. To increase the engine
idling speed, turn the idle adjusting screw in
direction (a), and to decrease it, turn the screw
in direction (b).

1. V-belt case drain plug

U5C010E0.book  Page 43  Thursday, April 5, 2007  8:59 AM

Summary of Contents for YFM7FGX

























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands