manualshive.com logo in svg

Yamaha YFM700RE, Owner'S Manual

Get the most out of your Yamaha YFM700RE with the comprehensive Owner's Manual. Download this essential manual for free from our website and gain access to important maintenance instructions, troubleshooting tips, and in-depth product details. Maximize your ATV experience with the Yamaha YFM700RE Owner's Manual, available for easy download at manualshive.com.

Share
Download
background image

7-14

7

●

Shift your weight forward.

●

Never open the throttle suddenly or make
sudden gear changes. The ATV could flip
over backwards.

●

Never go over the top of any hill at high
speed. An obstacle, a sharp drop, or another
vehicle or person could be on the other side
of the hill.

●

Never attempt to turn the ATV around on any
hill until you have mastered the turning tech-
nique as described in the Owner’s Manual on
level ground. Be very careful when turning
on any hill.

●

Avoid crossing the side of a steep hill if pos-
sible. When crossing the side of a hill, shift
your weight to the uphill side of the ATV.

U1PE61E0.book  Page 14  Thursday, April 4, 2013  6:18 PM

Summary of Contents for YFM700RE



































































































































































Reviews:

No comments

Related manuals for YFM700RE

Brands by name

Popular brands

Load more brands