manualshive.com logo in svg

Yamaha YFM50R, Owner'S Manual

Share
Download
Yamaha YFM50R Owner'S Manual Download Page 10

 

RIDING YOUR ATV  ...................................... 7-1

GETTING TO KNOW YOUR ATV.............. 7-2
RIDE WITH CARE AND GOOD 

JUDGEMENT ...........................................7-2

BE CAREFUL WHERE YOU RIDE ............ 7-8
TURNING YOUR ATV ............................. 7-12
CLIMBING UPHILL .................................. 7-13
RIDING DOWNHILL................................. 7-16
CROSSING A SLOPE.............................. 7-17
CROSSING THROUGH SHALLOW 

WATER ..................................................7-18

RIDING OVER ROUGH TERRAIN .......... 7-19
SLIDING AND SKIDDING ........................ 7-20
WHAT TO DO IF... ................................... 7-21
WHAT TO DO... ....................................... 7-21

PERIODIC MAINTENANCE AND MINOR 
REPAIR .......................................................... 8-1

Owner’s manual and tool kit  ......................  8-1
Periodic maintenance and lubrication 

chart   ........................................................ 8-3

Checking the spark plug ............................  8-7
Engine oil  ..................................................  8-8
Final gear oil ............................................  8-11
Cleaning the air filter element  .................  8-12
Cleaning the spark arrester  .....................  8-15
Adjusting the carburetor  ..........................  8-17
Adjusting the engine idling speed  ...........  8-17
Checking the throttle cable free play  .......  8-18

Valve clearance  ....................................... 8-18
Checking the front and rear brake 

shoes   .....................................................8-19

Adjusting the front brake lever free 

play   ........................................................8-20

Adjusting the rear brake lever free play  ... 8-22
Checking and lubricating the cables  ........ 8-23
Checking and lubricating the front and 

rear brake levers  ....................................8-24

Checking the wheel bearings ................... 8-24
Lubricating the knuckle shafts  ................. 8-24
Lubricating the steering shaft ................... 8-25
Battery ..................................................... 8-25
Replacing the fuse  ................................... 8-28
Removing a wheel  ................................... 8-28
Installing a wheel  ..................................... 8-29
Troubleshooting ....................................... 8-31
Troubleshooting chart  .............................. 8-32

CLEANING AND STORAGE ..........................9-1

Cleaning ..................................................... 9-1
Storage ...................................................... 9-2

SPECIFICATIONS .......................................10-1

CONSUMER INFORMATION.......................11-1

Identification numbers .............................. 11-1

Summary of Contents for YFM50R





















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands