5-3
5
EBU19541
Fuel
Make sure that there is sufficient fuel in the tank.
(See page 4-14.)
EBU19560
Engine oil
Make sure that the engine oil is at the specified lev-
el. Add oil as necessary. (See page 8-17.)
EBU19590
Final gear oil
Make sure that the final gear oil is at the specified
level. Add oil as necessary. (See page 8-21.)
EBU19600
Differential gear oil
Make sure that the differential gear oil is at the
specified level. Add oil as necessary. (See page
8-24.)
EBU19631
Coolant
Make sure that the coolant is at the specified level.
Add coolant as necessary. (See page 8-26.)
TIP
The coolant level must be checked on a cold en-
gine since the level varies with engine tempera-
ture.
EBU28531
Front and rear brakes
Brake levers and brake pedal
●
Check that there is no free play in the front brake
lever. If there is free play, have a Yamaha dealer
check the brake system.
●
Check for correct free play in the rear brake lever
and brake pedal. If the free play is incorrect, ad-
just it. (See page 8-42.)
●
Check operation of the levers and pedal. They
should move smoothly and there should be a
firm feeling when the brake is applied. If not,
have a Yamaha dealer check them.
Brake fluid level (front brake)
Check the brake fluid level. Add fluid if necessary.
(See page 8-40.)
Recommended brake fluid:
DOT 4
U37S61E0.book Page 3 Tuesday, June 2, 2009 10:33 AM
Summary of Contents for YFM450FAZ
