Yamaha YFM450FAT, Supplementary Service Manual

Page: 32 / 73

– 24 –
CHK
ADJ
CHECKING THE FINAL GEAR OIL LEVEL/CHECKING
THE CONSTANT VELOCITY JOINT DUST BOOTS
CHECKING THE FINAL GEAR OIL LEVEL
1. Place the vehicle on a level surface.
2. Remove:
• oil filler plug
1
3. Check:
• oil level
Oil level should be up to the brim of the
hole.
Oil level low
→
Add oil to the proper level.
CAUTION:
Take care not allow foreign material to
enter the final gear case.
4. Install:
• oil filler plug
Recommended oil
SAE 80 API “GL-4” Hypoid gear
oil
T
R
.
.
23 Nm (2.3 m
·
kg, 17 ft
·
lb)
CHECKING THE CONSTANT VELOCITY
JOINT DUST BOOTS
1. Check:
• dust boots
1
Damage
→
Replace.
Refer to “FRONT CONSTANT VELOCITY
JOINTS AND DIFFERENTIAL GEAR” in
chapter 7 (Manual No.: 5ND2-AE1) for the
front constant velocity joint dust boots or
“REAR CONSTANT VELOCITY JOINTS,
FINAL DRIVE GEAR AND DRIVE SHAFT”
for the rear constant velocity joint dust
boots.
È
Front
É
Rear
È
1
1
É