Yamaha YFM400AS Owner'S Manual Download Page 63 | Manualshive

Page: 63 / 184

background image

6-10

EBU00221

Accessories and loading

EBU00222

Accessories

Accessories can affect the handling and con-
trol of your ATV. Keep the following in mind
when considering an accessory or operating
an ATV which has accessories.

●

Choose only accessories designed for your
ATV. Your Yamaha dealer has a variety of
genuine Yamaha accessories. Other ac-
cessories may also be available on the
market. However, it is not possible for
Yamaha to test all non-Yamaha accesso-
ries, nor have any control over the quality or
suitability of them. Choose a genuine
Yamaha accessory, or one that is equiva-
lent in design and quality.

●

Accessories should be rigidly and securely
mounted. An accessory which can shift po-
sition or come off while you are riding could
affect your ability to control the ATV.

●

Do not mount an accessory where it could
interfere with your ability to control the ATV.
Examples include (but are not limited to) a
heavy or bulky object attached to the han-
dlebars which could make steering difficult,
an accessory that limits your ability to move
around on the seat, or one that limits your
view.

●

Use extra caution when riding an ATV with
accessories. The ATV may handle differ-
ently than it does without accessories.

U5VH11.book Page 10 Friday, March 28, 2003 2:47 PM

«
...
61
62
63
64
65
...
»

Summary of Contents for YFM400AS

























































































































































































Reviews:

No comments

Related manuals for YFM400AS

Brand: Yamaha Pages: 176

Brand: Sakai Pages: 77

TERRAIN DX4 CAB

Brand: CORVUS Pages: 136

Brand: Trail Rover Pages: 38

Brand: E-ride Industries Pages: 109

Brand: Xingyun Pages: 92

Brand: Hammerhead Pages: 67

jay 2016 series

Brand: Jayco Pages: 157

Brand: Humbaur Pages: 36

Brand: Etnyre Pages: 64

MARGAY racing K3

Brand: Ignite Pages: 30

Brand: Yamaha Pages: 150

Brand: Yamaha Pages: 156

Brand: Tao Motor Pages: 79

Brand: MULTIQUIP Pages: 54

Brand: Yamaha Pages: 420

Xsport 99XC-001

Brand: TJD Pages: 18

Brand: Ezgo Pages: 158

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands