manualshive.com logo in svg

Yamaha YFM350BAT, Owner'S Manual

Share
Download
Yamaha YFM350BAT Owner'S Manual Download Page 73

7-10

WARNING

_ 

Indicates a potential hazard that could
result in serious injury or death.

Do not operate at speeds too fast for your
skills or the conditions. 

Speed limiter 

For riders less experienced with this model,
this model is equipped with a speed limiter in
the throttle lever housing. The speed limiter
keeps the throttle from fully opening, even
when the throttle lever is pushed to the maxi-
mum. Turning the adjusting screw in limits the
maximum engine power available and de-
creases the maximum speed of the ATV.
Turning the adjusting screw in decreases the
top speed and turning it out increases the top
speed.

1. Locknut

2. Adjusting screw

WARNING

POTENTIAL HAZARD 
Operating this ATV at speeds too fast
for your skills or the conditions. 
WHAT CAN HAPPEN 
Increases your chances of losing con-
trol of the ATV, which can result in an
accident. 
HOW TO AVOID THE HAZARD 
Always go at a speed that is proper for
the terrain, visibility and operating con-
ditions, and your experience.

U5WH11.book  Page 10  Monday, March 29, 2004  3:21 PM

Summary of Contents for YFM350BAT














































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands