–
+
ELEC
– 42 –
IGNITION SYSTEM
C0NTINUITY
CORRECT
Spark plug gap:
0.6 ~ 0.7 mm (0.024 ~ 0.028 in)
*
INCORRECT
Repair or replace the spark plug.
for CDN
4.Ignition spark gap
●
Disconnect the spark plug cap from the
spark plug.
●
Connect the dynamic spark tester
1
as
shown.
2
Spark plug cap
3
Spark plug
●
Turn the main switch to “ON”.
●
Check the ignition spark gap.
●
Crank the engine by pushing the starter
switch and increase the spark gap until a
misfiring occurs.
Minimum spark gap:
6.0 mm (0.24 in)
MEETS SPECIFICATION
The ignition system is not faulty.
for Europe/Oceania
OUT OF
SPECIFICATION
OR NO SPARK
4.Ignition spark gap
●
Disconnect the spark plug cap from the
spark plug.
●
Connect the ignition checker
1
as shown.
2
Spark plug cap
●
Turn the main switch to “ON”.
●
Check the ignition spark gap
a
.
●
Crank the engine by pushing the starter
switch and increase the spark gap until a
misfire occurs.
Minimum spark gap:
6.0 mm (0.24 in)
*
MEETS SPECIFICATION
The ignition system is not faulty.