Yamaha YFM250X 2002, Supplementary Service Manual

Page: 19 / 27

– 11 –
SPEC
1
Rear brake cable
2
Throttle cable
3
Wire harness
4
Starter motor lead
5
Tail/brake light lead
È
Route the throttle cable and rear brake cable
through the cable guide. Make sure that the
throttle cable is routed to the inside of the rear
brake cable.
É
Fasten the wire harness to the frame with the
plastic clamps.
Ê
Make sure the starter motor lead and wire har-
ness do not contact the ignition coil.
Ë
Fasten the wire harness, starter motor lead, and
ignition coil lead to the frame with the plastic
locking tie.
Ì
Route the taillight lead through the lead holders
on the lid and the bottom of the storage box.
Í
50 mm (2.0 in)
CABLE ROUTING