8-19
1
2
3
4
5
6
7
8
9
10
11
15. Install the breather hose and then tighten the
clamp screw.
16. Install the seat.
TIP
The air filter element should be cleaned every 20–
40 hours. It should be cleaned and lubricated more
often if the ATV is operated in extremely dusty ar-
eas. Each time the air filter element maintenance
is performed, check the air inlet of the air filter case
for obstructions. Check the air filter case rubber
joint to the carburetor fittings and the rubber joint
manifold fittings for an air-tight seal. Tighten all fit-
tings securely to avoid the possibility of unfiltered
air entering the engine.
V-belt case air filter element
1. Place the ATV on a level surface.
2. Remove the front carrier by removing the
bolts.
3. Remove the panel shown by removing the
quick fasteners.
1. Bolt
2. Front carrier
2
1
1
1
✤✰✬✤✩ ✤✬
