manualshive.com logo in svg

Yamaha YFM09RYXG, Owner'S Manual

Share
Download
Yamaha YFM09RYXG Owner'S Manual Download Page 99

8-20

8

TIP

The engine is warm when it quickly responds to
the throttle.

 

2. Attach the tachometer to the spark plug lead.
3. Check the engine idling speed and, if neces-

sary, adjust it to specification by turning the
throttle stop screw at the carburetor. To in-
crease the engine idling speed, turn the throt-
tle stop screw in direction (a), and to decrease
it, turn the screw in direction (b).

TIP

If the specified idling speed cannot be obtained as
described above, have a Yamaha dealer make the
adjustment.

 

EBU33950

Adjusting the throttle lever free play

The throttle lever free play should be checked and,
if necessary, adjusted at the intervals specified in
the periodic maintenance and lubrication chart.
The throttle lever free play should measure 1.5–4.0
mm (0.06–0.16 in) as shown. Periodically check
the throttle lever free play and, if necessary, adjust
it as follows.

TIP

The engine idling speed must be checked, and
adjusted if necessary, before adjusting the throttle
lever free play.

 

1. Slide the rubber covers apart.
2. Loosen the locknut.
3. To increase the throttle lever free play, turn

the throttle lever free play adjusting nut in di-
rection (a). To decrease the throttle lever free
play, turn the adjusting nut in direction (b).

1. Throttle stop screw

Engine idling speed:

1600–1800 r/min

(a)

(b)

1

UBD360E0.book  Page 20  Wednesday, February 25, 2015  2:41 PM

Summary of Contents for YFM09RYXG

































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands