Yamaha YFM 90 Owner'S Manual Download

Page: 40 / 132

4-8

5. When the engine has started, remove the

kickstarter lever and store it under the seat.

6. Install the kickstarter lever cap and the seat.

NOTICE

ECB02300

Do not use the kickstarter if the battery is not
installed or if the battery leads are not connect-
ed.

EBU18721

Fuel tank cap

Remove the fuel tank cap by turning it counter-
clockwise.

EBU18758

Fuel

Make sure there is sufficient gasoline in the tank.

WARNING

EWB02522

Gasoline and gasoline vapors are extremely
flammable. To avoid fires and explosions and
to reduce the risk of injury when refueling, fol-
low these instructions.

1. Before refueling, turn off the engine and be

sure that no one is sitting on the vehicle. Nev-
er refuel while smoking, or while in the vicinity

1. Fold out.
2. Push down.

1. Fuel tank cap

UBD362E0.book Page 8 Tuesday, January 31, 2017 5:10 PM

Summary of Contents for YFM 90





































































































































Search results

Summary of Contents for YFM 90

Reviews:

Related manuals for YFM 90

Brands by name

Popular brands

Yamaha YFM 90, Owner'S Manual

Search results

Summary of Contents for YFM 90

Reviews:

Related manuals for YFM 90

Brands by name

Popular brands