13
YDS-120 Owner’s Manual
Changing Settings with the [Fn] Button
Press specific keys while holding the [Fn] button to perform
settings for the various functions of the instrument.
Basic operations
Use the following procedure to perform settings for each
function.
1
While holding the [Fn] button, press the key to
which the function is assigned. Hold the [Fn] but-
ton until you finish performing settings. If you
release the button, the value at that moment is
set and operation returns to the Voice selection
screen.
2
While holding the [Fn] button, press VOICE [
]/
[
] and select the desired value.
3
When you have finished selecting a value,
release the [Fn] button.
This will complete the setting and return the operation
to the Voice selection screen.
NOTE
• Press both VOICE [
]/[
] buttons simultaneously to
restore the value to the factory default.
Example: Tuning
C5
key
Function
Settings
Key
Breath pressure resistance
Determines how much the sound vol-
ume changes in response to the sus-
tained strength of your breath. The
lower the value, the more responsive
the instrument is to your breath
strength.
1 to 5
Default: 3
C3
Breath response
Determines how much the sound vol-
ume changes in response to your initial
breath strength. The higher the value,
the harder you have to initially blow
into the instrument to produce sound.
1 to 10
Default: 5
Tc
Key response
Prevents unwanted sounds from being
produced, due to inconsistent timing in
fingering when pressing or releasing
multiple keys simultaneously. The
higher the value, the more unwanted
sounds are suppressed.
0 to 20
Default: 10
Ta
Tuning
Adjusts the overall pitch of the instru-
ment. The pitch value is displayed on
the LED screen. You can adjust the
pitch in the range of 427 to 453 Hz in
0.5 Hz steps. The dot in the first digit of
the LED display indicates 0.5 Hz.
427 to 453 (Hz)
Default: 440
C5
Auto power off
Sets the function for automatically
turning the power off. The value is dis-
played on the LED screen.
Off, 5, 10, 15,
30, 60, 120
(minutes)
Default: 30
Tf
Reverb
Set the reverberation effect. The higher
the number, the greater the effect.
Reverberation is applied only to the
headphone output.
NOTE
• Reverberation does not affect the
AUX IN input.
Off, 1 to 5
Default: Off
G
#
Summary of Contents for YDS-120
Page 20: ...22 YDS 120 MEMO...
Page 21: ...23 YDS 120 MEMO...
Page 22: ...VEJ3550 2022 Yamaha Corporation Published 06 2022 POEI A1...
