Yamaha YC Series, Owner'S Manual

Page: 38 / 76

MENU LIST
YC61 Owner’s Manual
38
Keyboard/
Pedal Octave Shifts the octave range of the keyboard up or down.
Settin g s:
-3 – +3
Default: +0
Transpose Transposes the pitch of the keyboard up or down in semitones.
Settin g s:
-12 – +12
Default: +0
Touch Curve Determines how actual velocities will be generated according to the strength
with which you play notes on the keyboard (page 11).
Settin g s: Normal, Soft, Hard, Wide, Fixed
Default:
Normal
Fixed Velocity Set this parameter to produce the same velocity, regardless of how hard or soft
you play the keyboard. This parameter is only used when “Touch Curve” is set to
“Fixed.”
Settin g s: 1 – 127
Default:
64
Sustain Pedal Type Determines which type of sustain pedal is connected to the FOOT SWITCH
[SUSTAIN] jack. Select “FC3A (HalfOn)” when you want to use a pedal with a
Half Damper function.
Settin g s:
FC3A (HalfOn), FC3A (HalfOff), FC4A/FC5
Default:
FC3A (HalfOn)
Foot Switch Assign Determines the Control Change number generated by using the Footswitch
connected to the FOOT SWITCH [ASSIGNABLE] jack.
Default:
Live Set +
Local Control Determines whether Local Control is on or off.
When this is set to “Off,” this instrument’s tone generator is internally
disconnected from the keyboard and controllers, and no sound will be produced
when the keyboard is played. However, regardless of the setting here,
performance information from this instrument’s keyboard and controllers is
transmitted as MIDI messages, and this instrument's tone generator will
continue to produce sound in response to the MIDI messages received from
MIDI input, depending on the MIDI settings.
Default: On
I/O Volume USB Audio Determines the volume of USB Audio input.
Settin g s:
0 – 127
Default: 64
Output Adjusts the final output sound level of the instrument.
Settin g s:
-24 dB – +0 dB – +24 dB
Default: -6 dB
Auto Power Off Determines whether to set the Auto Power Off function to “Enable” or “Disable.”
Default:
Disable
Function name Description