Yamaha YAS-81 Page 36 Owner'S Manual Download | Manualshive

Page: 36 / 44

background image

32

En

Night listening mode enables you to listen to dialog or vocals more clearly at lower volume by suppressing louder sound
effects. This function is useful when you enjoy movies or music at night.

Press

NIGHT

.

“NIGHT ON” appears in the front panel display.
The NIGHT indicator lights up when Night listening
mode is selected.

y

• To cancel night listening mode, press

NIGHT

again.

• When this function is on, compressed music enhancer mode is

automatically set to off. (

• The setting is set for all the input sources.

You can adjust the volume balance of the virtual speakers and subwoofer.

y

• You can also adjust the speaker volume while the test tone is output. (

• The setting is set for all the input sources.

LISTENING AT LOW VOLUME (NIGHT LISTENING MODE)

NIGHT

Lights up

ADJUSTING THE VOLUME BALANCE DURING PLAYBACK

SW +/–

Adjusts the output level of the subwoofer
channel.
Control range: +6 to –6

/–

Adjusts the output level of the center virtual
speaker channel.
Control range: +6 to –6

SUR. +/–

Adjusts the output level of the surround/
surround back virtual speaker channels.
Control range: +6 to –6

«
...
34
35
36
37
38
...
»

Summary of Contents for YAS-81













































Reviews:

No comments

Related manuals for YAS-81

Brand: BAS-IP Pages: 18

WAGO-I/O-SYSTEM 750 XTR Series

Brand: WAGO Pages: 272

Brand: WAGO Pages: 450

Brand: Abus Pages: 14

Brand: Uconnect Pages: 45

Brand: ViziT Pages: 11

Brand: Audiomusic Systems Pages: 12

Brand: JB Systems Pages: 12

Brand: DC-Connex Pages: 16

Brand: J.W. Davis Pages: 2

Brand: F.F. Group Pages: 36

Brand: Vizio Pages: 44

Brand: Gardsman Pages: 55

Brand: Beyerdynamic Pages: 28

SONIC STARLIGHT

Brand: Hama Pages: 20

Planux ViP 6202

Brand: Comelit Pages: 58

SITALI CXVM 280

Brand: Olimpia splendid Pages: 32

Brand: Daewoo Pages: 22

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands