Yamaha Y16ZR 2021, Owner'S Manual

Page: 37 / 108

Instrument and control functions
5-7
5
EAUN2960
Clock
The clock uses a 12-hour time system.
To set the clock
1. Push the “RESET/SELECT” but-
ton until the hour digits start flash-
ing.
2. Use the “RESET/SELECT” button
to set the hours.
3. Push the “RESET/SELECT” but-
ton until the minute digits start
flashing.
4. Use the “RESET/SELECT” button
to set the minutes.
5. Push the “RESET/SELECT” but-
ton until the minute digits stop
flashing. The setting is confirmed.
TIP
If you do not push the “RESET/SE-
LECT” button to confirm the setting
within 90 seconds, the clock will not be
set and will return to the prior time.
EAU87750
Instantaneous fuel consumption
display
This display shows the fuel consump-
tion under the current riding condi-
tions. It can be set to either “km/L” or
“L/100 km”. To switch the fuel con-
sumption measurement units, push the
“RESET/SELECT” button until the
measurement units change.

“km/L”: the distance that can be
traveled on 1.0 L of fuel.
 “L/100 km”: the amount of fuel
necessary to travel 100 km.
TIP
When traveling under 10 km/h (6 mi/h),
“_ _._” is displayed.
EAU87790
TIP
The instantaneous fuel consumption
function should be used for general
reference only. Do not use this figure to
estimate the distance that can be trav-
eled on the current tank of fuel.
EAU87811
Average fuel consumption display
1. Clock
1
1. Instantaneous fuel consumption display
1
1. Average fuel consumption display
1