background image

EB001000

NOTICE

This manual was produced by the Yamaha Motor Company primarily for use by Yamaha
dealers and their qualified mechanics. It is not possible to include all the knowledge of a
mechanic in one manual, so it is assumed that anyone who uses this book to perform main-
tenance and repairs on Yamaha motorcycles has a basic understanding of the mechanical
ideas and the procedures of motorcycle repair. Repairs attempted by anyone without this
knowledge are likely to render the motorcycle unsafe and unfit for use.

Yamaha Motor Company, Ltd. is continually striving to improve all its models. Modifications
and significant changes in specifications or procedures will be forwarded to all authorized
Yamaha dealers and will appear in future editions of this manual where applicable.

NOTE:

Designs and specifications are subject to change without notice.

IMPORTANT INFORMATION

Particularly important information is distinguished in this manual by the following notations.

The Safety Alert Symbol means ATTENTION! BECOME ALERT! YOUR
SAFETY IS INVOLVED!

Failure to follow WARNING instructions could result in severe injury or
death to the motorcycle operator, a bystander or a person inspecting or
repairing the motorcycle.

A CAUTION indicates special precautions that must be taken to avoid
damage to the motorcycle.

A NOTE provides key information to make procedures easier or clearer.

WARNING

CAUTION:

NOTE:

Summary of Contents for XVS650 '97

















Reviews: