Perio
d
ic maintenance an
d
a
d
justment
7-34
7
2. Disconnect the headlight coupler,
and then remove the headlight
bulb cover.
3. Remove the headlight bulb holder
by turning it counterclockwise,
and then remove the burnt-out
bulb.
4. Place a new headlight bulb into
position, and then secure it with
the bulb holder.
5. Install the headlight bulb cover,
and then connect the coupler.
6. Install the headlight unit by install-
ing the screws.
7. Have a Yamaha dealer adjust the
headlight beam if necessary.
EAU70550
Replacin
g
the
b
rake/tail li
g
ht
b
ul
b
1. Remove the brake/tail light lens by
removing the screws.
2. Remove the burnt-out bulb by
pushing it in and turning it coun-
terclockwise.
1. Screw
1. Headlight coupler
2. Headlight bulb cover
1. Headlight bulb holder
1. Screw
U46B1BE0.book Page 34 Monday, July 8, 2019 11:51 AM
