'
D.
Throttle cable
free
play adjustment
Prior to adjusting the
throttle
.
cable free play, the
engine idling speed should be adjusted properly.
1.
C
h
e
c
k
:
•
Throttle cable free play
®
Out of specification , Adjust.
Free play:
4
�
6 mm (0.16- 0
.
2
4
in)
(at throttle grip flange)
E.
Front brake adjustment
1.
Check
:
·
•
Brake lever free play
®
Out ofsp�cification , Adjust.
·
Free play (brake
·
lever):
2
-
5
mm (0.08 - 0.20
in)
(at brake lever end)
2.
Adjust:
•
Loosen the loc
kn
ut
(D.
•
Turn
the aqjpster
.
®
II')
direction
<fi)
or © until the
specified free play Is obtained.
Direction
<6):
Brake lever free play is
Increased.
Direction ©:
Brake lever free play is
decreased.
•
Tighten the locknut.
'
.
2.
Adjust:
•
Loosen the locknut (D.
•
T4m the adjuster® In directlon
<fi)
or© until the
specified free play is obtained.
Direction
<6):
Free
play is increased.
Direction ©:
Free
play is decreased.
•
Tighten the locknut.
A
WARNING
After adjusting, tum the handlebar to the right and
to the left to ensure that this does not cause the
engine Idling speed to change.
::::::::
...
.
.
..
.
.
..
�:;:::;::
After adjusting
the
front brake lever
free
play,
make sure that there is no brake drag.
A
WARNING
A
soft or spongy feeling
·
in the brake lever can
Indicate
the
presence of air
in
the brake system.
This air must
be
removed by bleeding the brake
system before the motorcycle is ope
rated
; Air In
the brake system will considerably reduce braking
performance and could result in a loss of control
and possibly an accident. Inspect and, if
n
ecessa
ry
,
·
bleed the brake system.
Page 11
