Yamaha XT250, Owner'S Manual

Page: 21 / 100

INSTRUMENT AND CONTROL FUNCTIONS
3-3
2
3
4
5
6
7
8
9
EAU44861
Multi-function display
WARNING
EWA12311
Be sure to stop the vehicle before
making any setting changes to the
multi-function display.
The multi-function display is equipped
with the following:
● a speedometer (which shows the
riding speed)
● an odometer (which shows the to-
tal distance traveled)
● two tripmeters (which show the
distance traveled since they were
last set to zero)
●
a clock
NOTE:
● Be sure to turn the key to “ON” be-
fore using the “SELECT” and “RE-
SET” buttons.
●
When the key is turned to “ON”, all
of the display segments of the
multi-function display will appear
one after the other and then disap-
pear, in order to test the electrical
circuit.
●
To switch the speedometer and
odometer/tripmeter displays be-
tween miles and kilometers, press
the “SELECT” button for at least
two seconds.
Odometer, clock and tripmeter
modes
Pushing the “SELECT” button switches
the display between the odometer
mode “ODO” and the tripmeter modes
“TRIP” in the following order:
ODO
→
TRIP (top)
→
TRIP (bottom)
→
ODO
To reset a tripmeter, select it by push-
ing the “SELECT” button until “TRIP”
begins flashing (“TRIP” will only flash
for five seconds). While “TRIP” is flash-
ing, push the “RESET” button for at
least one second.
Clock mode
To set the clock:
1. Push the “SELECT” button and
1. “SELECT” button
2. “RESET” button
3. Clock
4. Speedometer
1 2 3 4
1. Odometer/tripmeter (bottom)
2. Tripmeter (top)
2 1