Periodic maintenance and adjustment
7-39
1
2
3
4
5
6
7
8
9
10
11
12
TIP
The drive chain does not need to be
disassembled in order to remove and
install the wheel.
5. Remove the axle nut, washer and
drive chain adjusting plate from the
left side.
6. While supporting the brake caliper,
pull the wheel axle out together
with the drive chain adjusting plate
and washer from the right side.
7. Remove the spacers and wheel by
pulling the wheel to the back.
NOTICE:
Do not apply the brake
after the wheel and brake disc
have been removed, otherwise
the brake pads will be forced
shut.
[ECA11073]
To install the rear wheel
1. Install the spacers into both sides
of the wheel hub.
2. Install the right side washer and
drive chain adjusting plate onto the
wheel axle, and then install the
wheel and brake caliper bracket by
inserting the wheel axle from the
right side.
TIP
Make sure that the drive chain ad-
justing plates are installed with the
punched sides facing to the out-
side and that the retainer on the
swingarm is inserted into the slot in
the brake caliper bracket.
Make sure that there is enough
space between the brake pads be-
fore installing the wheel.
3. Install the drive chain onto the rear
sprocket.
4. Install the left side drive chain ad-
justing plate, washer and axle nut.
1. Axle nut
2. Drive chain adjusting plate
2
1
(a)
1. Drive chain adjusting plate
2. Wheel axle
3. Brake caliper
1
3
2
1. Retainer
1
B1U-9-13_1.book 39 ページ ２０２２年４月７日 木曜日 午後３時１４分
