manualshive.com logo in svg

Yamaha XT225T, Owner'S Manual

Share
Download
Yamaha XT225T Owner'S Manual Download Page 3

 

INTRODUCTION

 

EAU10080

 

Congratulations on your purchase of the Yamaha XT225/XT225C. This model is the result of Yamaha’s vast experience in
the production of fine sporting, touring, and pacesetting racing machines. It represents the high degree of craftsmanship and
reliability that have made Yamaha a leader in these fields.
This manual will give you an understanding of the operation, inspection, and basic maintenance of this motorcycle. If you
have any questions concerning the operation or maintenance of your motorcycle, please consult a Yamaha dealer.
The design and manufacture of this Yamaha motorcycle fully comply with the emissions standards for clean air applicable
at the date of manufacture. Yamaha has met these standards without reducing the performance or economy of operation of
the motorcycle. To maintain these high standards, it is important that you and your Yamaha dealer pay close attention to the
recommended maintenance schedules and operating instructions contained within this manual.

Summary of Contents for XT225T



































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands