Instrument an
d
control functions
4-12
4
To adjust the brightness
1. Turn the main switch off.
2. Push and hold the bottom set but-
ton.
3. Turn the main switch on and con-
tinue pushing the bottom set but-
ton until the display switches to
the brightness level display.
4. Push the top set button to set the
brightness level.
5. Push the bottom set button to
confirm the selected brightness
level and exit the brightness level
display.
EAU47636
D-mo
d
e (
d
rive mo
d
e)
D-mode is an electronically controlled
engine performance system with three
mode selections: “STD”, “A”, and “B”.
Push the drive mode switch “MODE”
to switch between modes. (See page
4-14.)
TIP
Before using D-mode, make sure you
understand its operation along with the
operation of the drive mode switch.
Mo
d
e “STD”
Mode “STD” is suitable for various rid-
ing conditions.
This mode allows the rider to enjoy
smooth and sporty drivability from the
low-speed range to the high-speed
range.
Mo
d
e “A”
Mode “A” offers a sportier engine re-
sponse in the low- to mid-speed range
compared to mode “STD”.
Mo
d
e “B”
Mode “B” offers response that is
somewhat less sharp compared to
mode “STD” for riding situations that
require especially sensitive throttle op-
eration.
1. Drive mode switch “MODE”
1
UBAEE0E0.book Page 12 Tuesday, December 10, 2019 2:42 PM
