FEATURES
1-4
TIP
The odometer will lock at 999999 and cannot be
reset.
Tripmeters
The tripmeters show the distance traveled since
they were last reset.
To reset a tripmeter, change the display to the
tripmeter you want to reset, and then push the
“RESET” button until it is reset.
TIP
The tripmeters will reset and continue counting
after 9999.9 is reached.
Fuel reserve tripmeter
If the last segment of the fuel meter starts flash-
ing, the display automatically changes to the fuel
reserve tripmeter “TRIP F” and starts counting
the distance traveled from that point.
To reset the fuel reserve tripmeter, push the
“RESET” button until it is reset.
TIP
If you do not reset the fuel reserve tripmeter
manually, it will reset automatically and disap-
pear from the display after refueling and travel-
ing 5 km (3 mi).
Clock
The clock uses a 12-hour time system.
To set the clock
1. Push the “SELECT” button to change the dis-
play to the clock.
2. Push the “SELECT” button until the hour dig-
its start flashing.
3. Use the “RESET” button to set the hours.
4. Push the “SELECT” button and the minute
digits start flashing.
5. Use the “RESET” button to set the minutes.
6. Push the “SELECT” button to confirm the set-
tings.
Instantaneous fuel consumption display
This display shows the fuel consumption under
the current riding conditions. It can be set to ei-
ther “km/L” or “L/100 km”, or “MPG” when using
miles. To switch the fuel consumption measure-
ment units, push the “SELECT” button until the
measurement units change.
• “km/L”: the distance that can be traveled on 1.0
L of fuel.
• “L/100 km”: the amount of fuel necessary to
travel 100 km.
• “MPG”: the distance that can be traveled on
1.0 Imp.gal of fuel.
1. Tripmeter
1. Fuel reserve tripmeter
1
1
1. Clock
1. Instantaneous fuel consumption display
1
1
Summary of Contents for XSR125 2021
Page 1: ...2021 SERVICE MANUAL XSR125 MTM125 BFG F8197 E0 ...
Page 2: ......
Page 6: ......
Page 8: ......