Instrument and control functions
3-25
1
2
3
4
5
6
7
8
9
10
11
12
to increase the rebound damping force.
Turn the adjusting screw in direction (b)
to decrease the rebound damping
force.
To set the rebound damping force, turn
the adjuster in direction (a) until it stops,
and then count the turns in direction (b).
TIP
When turning the damping force adjust-
er in direction (b), it may turn beyond
the stated specifications, however such
adjustments are ineffective and may
damage the suspension.
WARNING
EWA10222
This shock absorber assembly con-
tains highly pressurized nitrogen
gas. Read and understand the fol-
lowing information before handling
the shock absorber assembly.
Do not tamper with or attempt to
open the cylinder assembly.
Do not subject the shock ab-
sorber assembly to an open
flame or other high heat source.
This may cause the unit to ex-
plode due to excessive gas
pressure.
Do not deform or damage the
cylinder in any way. Cylinder
damage will result in poor
damping performance.
Do not dispose of a damaged or
worn-out shock absorber as-
sembly yourself. Take the shock
absorber assembly to a Yamaha
dealer for any service.
EAU84680
Luggage strap holders
Use the indicated strap points to secure
luggage ties to the vehicle.
1. Rebound damping force adjusting screw
Rebound damping setting:
Minimum (soft):
3 turn(s) in direction (b)
Standard:
1-1/2 turn(s) in direction (b)
Maximum (hard):
0 turn(s) in direction (b)
1 (a)
(b)
1. Luggage strap holder
1
BAE-28199-E1.book 25 ページ ２０１９年８月２３日 金曜日 午後３時５６分
