Yamaha XP560D, Owner'S Manual

Page: 63 / 126

Instrument an d control functions
5-27
5
EAU77584
Shock a b sor b er assem b ly
WARNING
EWA10222
This shock a b sor b er assem b ly con-
tains hi g hly pressurize d nitro g en
g as. Rea d an d un d erstan d the fol-
lowin g information b efore han d lin g
the shock a b sor b er assem b ly.

Do not tamper with or attempt
to open the cylin
d er assem b ly.

Do not su b ject the shock a b -
sor b er assem b ly to an open
flame or other hi g h heat source.
This may cause the unit to ex-
plo
d e d ue to excessive g as
pressure.

Do not d eform or d ama g e the
cylin d er in any way. Cylin d er
d ama g e will result in poor
d ampin g performance.

Do not d ispose of a d ama g e d or
worn-out shock a b sor b er as-
sem b ly yourself. Take the shock
a b sor b er assem b ly to a Yamaha
d ealer for any service.
For XP560D:
This model is equipped with adjustable
suspension. The spring preload and re-
bound damping force can be adjusted.
Sprin g preloa d
Turn the adjusting ring in direction (a)
to increase the spring preload.
Turn the adjusting ring in direction (b)
to decrease the spring preload.

Align the appropriate notch in the
adjusting ring with the position in-
dicator on the shock absorber.

Use the special wrench included
in the tool kit to make the adjust-
ment.
Re b oun d d ampin g force
Turn the adjusting screw in direction (a)
to increase the rebound damping
force.
Turn the adjusting screw in direction (b)
to decrease the rebound damping
force.
To set the rebound damping force, turn
the adjuster in direction (a) until it
stops, and then count the turns in di-
rection (b).
1. Spring preload adjusting ring
2. Special wrench
3. Position indicator
1
2
3
4
5
6
7
1
(a)
(b)
3
2
Sprin g preloa d settin g :
Minimum (soft):
7 (XP560D)
Standard:
4 (XP560D)
Maximum (hard):
1 (XP560D)
UB3TE0E0.book Page 27 Tuesday, September 17, 2019 9:35 AM