INSTRUMENT AND CONTROL FUNCTIONS
3-12
3
The instantaneous fuel consumption
display can be set to either “km/L” or
“L/100 km” (except for the UK).
For the UK only:
The instantaneous fuel consumption is
displayed “MPG”.
When the display is set to “km/L”,
the distance that can be traveled
on 1.0 L of fuel under the current
riding conditions is shown.
When the display is set to “L/100
km”, the amount of fuel necessary
to travel 100 km under the current
riding conditions is shown.
For the UK only: The distance that
can be traveled on 1.0 Imp.gal of
fuel under the current riding condi-
tions is shown.
To switch between the instantaneous
fuel consumption displays, push the
“INFO” button for less than one sec-
ond when one of the displays is shown
(except for the UK).
TIP
If traveling at speeds under 10 km/h
(6.0 mi/h), “_ _._” is displayed.
Average speed display
The average speed is displayed “kmh”
(except for the UK). The average speed
is the total distance divided by total
time (with the key in “ON” position)
since the last set to zero.
For the UK only:
The average speed is displayed
“MPH”.
This display shows the average speed
since it was last reset.
To reset the average speed display,
select it by pushing the “INFO” button,
and then push and hold the “INFO”
button for 3 seconds.
Warning message function
Warning message corresponding to
the warning that you encounter.
When two or more warning occur,
warning message display shall be
changed as follows:
L FUEL
→
H TEMP
→
L BATT or H
BATT
→
ICE
→
OIL
→
SERV
→
V-
BELT SERV
→
L FUEL
Self-diagnosis device
This model is equipped with a self-di-
agnosis device for various electrical
circuits.
If a problem is detected in any of those
circuits, the engine trouble warning
light will come on and the display will
indicate an error code.
ZAUM1112
C H
km
Odo
Ave
Cons
V-Belt
F
1. Error code display
ZAUM1114
Trip
C H
Time
1
U2DLE1E0.book Page 12 Friday, November 8, 2013 7:45 PM
