Yamaha XMAX CZD300-A Manual Download

Page: 52 / 112

Instrument an

control functions

5-22

ent. Be sure to ti

hten the

screws to the specifie

torque.

[EWA15511]

5. Place the bolt access covers, and

then install the quick fasteners.

EAU46833

Han

ar position

The handlebar can be adjusted to one
of two positions to suit the rider’s pref-
erence. Have a Yamaha dealer adjust
the position of the handlebar.

EAU14895

justin

the shock a

sor

assem

lies

WARNING

EWA10211

Always a

just

oth shock a

sor

assem

lies equally, otherwise poor

han

lin

loss of sta

ility may re-

sult.

Each shock absorber assembly is
equipped with a spring preload adjust-
ing ring.

NOTICE

ECA10102

To avoi

ama

the mechanism,

o not attempt to turn

eyon

the

maximum or minimum settin

Adjust the spring preload as follows.
Turn the adjusting ring in direction (a)
to increase the spring preload.
Turn the adjusting ring in direction (b)
to decrease the spring preload.



Align the appropriate notch in the
adjusting ring with the position in-
dicator on the shock absorber.



Use the spring preload adjusting
tool included in the tool kit to
make this adjustment.

1. Bolt

htenin

torque:

Windshield bolt:

8 N·m (0.8 kgf·m, 5.9 lb·ft)

1. Handlebar

UB5XEYE0.book Page 22 Monday, November 16, 2020 8:46 AM

Summary of Contents for XMAX CZD300-A

















































































































Search results

Summary of Contents for XMAX CZD300-A

Reviews:

Related manuals for XMAX CZD300-A

Brands by name

Popular brands

Yamaha XMAX CZD300-A, Manual

Search results

Summary of Contents for XMAX CZD300-A

Reviews:

Related manuals for XMAX CZD300-A

Brands by name

Popular brands