Yamaha XMAX CZD300-A Manual Download

Page: 56 / 112

Instrument an

control functions

5-26

With the engine turned off:
1. Place vehicle on centerstand.
2. Move the sidestand down.
3. Turn main switch to on position.
4. Apply the front or rear brake.
5. Push the start switch.

Does the engine start?

With the engine still off:
6. Move the sidestand up.
7. Apply the front or rear brake.
8. Push the start switch.

Does the engine start?

With the engine still running:
9. Move the sidestand down.

Does the engine stall?

The system is OK.

The vehicle can be ridden.

YES

The sidestand switch may not be working.

The vehicle should not be ridden

until

checked by a Yamaha dealer.

The sidestand switch may not be working.

The vehicle should not be ridden

until

checked by a Yamaha dealer.

The brake switch may not be working.

The vehicle should not be ridden

until

checked by a Yamaha dealer.

WARNING

The vehicle must be placed on the
centerstand during this inspection.
If a malfunction is found, have the vehicle
inspected before riding.

UB5XEYE0.book Page 26 Monday, November 16, 2020 8:46 AM

Summary of Contents for XMAX CZD300-A

















































































































Search results

Summary of Contents for XMAX CZD300-A

Reviews:

Related manuals for XMAX CZD300-A

Brands by name

Popular brands

Yamaha XMAX CZD300-A, Manual

Search results

Summary of Contents for XMAX CZD300-A

Reviews:

Related manuals for XMAX CZD300-A

Brands by name

Popular brands