Yamaha Xmax 250 Owner'S Manual Download Page 28

Page: 28 / 82

EAU14540

Front storage compartment

1. Lock

To open the storage compartment

Insert the key into the lock, turn it
clockwise, and then pull on it to open
the storage compartment lid.

1.Storage compartment

To close the storage compartment

Push the storage compartment lid
into the original position, and then
remove the key.

EWA10960

WARNING

●

Do not exceed the load limit of
1 kg (2.205 lb) for the storage
compartment.

●

Do not exceed the maximum
load of 181 kg (399.1 lb) for the
vehicle.

EAUT1060

Storage compartment

1.Storage compartment

There is a storage compartment
under the seat.

EWA10960

WARNING

●

Do not exceed the load limit of
5 kg (11.02 lb) for the storage
compartment.

●

Do not exceed the maximum
load of 181 kg (399.1 lb) for the
vehicle.

ECA10080

CAUTION:

Keep the following points in mind
when using the storage compart-
ment.

INSTRUMENT AND CONTROL FUNCTIONS

3-14

1C0-F8199-E2.qxd 06/03/2006 13:08 Página 3-14

Summary of Contents for Xmax 250



















































































Search results

Summary of Contents for Xmax 250

Reviews:

Related manuals for Xmax 250

Brands by name

Popular brands

Yamaha Xmax 250, Owner'S Manual

Search results

Summary of Contents for Xmax 250

Reviews:

Related manuals for Xmax 250

Brands by name

Popular brands