manualshive.com logo in svg

Yamaha XLT800 WaveRunner 2002, Owner'S/Operator'S Manual

The Yamaha XLT800 WaveRunner 2002 Owner's/Operator's Manual is a valuable resource for all WaveRunner enthusiasts. This comprehensive manual provides step-by-step instructions and essential information for operating and maintaining the XLT800 model. Easily download the manual for free from our website, ensuring you have all the necessary knowledge to optimize your WaveRunner experience.

Share
Download
background image

6-4

E

EJU01125 

Index

2-stroke engine oil................................... 3-2

A

Adjusting the carburetor ........................ 4-22
Adjusting the choke cable ..................... 4-19
Adjusting the trolling speed ................... 4-22
Approval label of Emission control 
certificate................................................. 1-2

B

Battery..............................................3-8, 4-5
Battery warning indicator....................... 2-26
Beaching the watercraft ........................ 3-31
Bilge ........................................................ 3-7
Bleeding the oil injection pump ............. 4-23
Boarding alone ...................................... 3-24
Boarding and starting in deep water ..... 3-24
Boarding with passengers..................... 3-25
Bow down.............................................. 2-16
Bow up .................................................. 2-16

C

Capsized watercraft .............................. 3-26
Caution labels ......................................... 1-6
Choke knob ........................................... 2-10
Cleaning and adjusting the spark 
plugs...................................................... 4-15
Cleaning the jet intake and impeller ........ 5-4
Cleaning the watercraft ........................... 4-6
Clock ..................................................... 2-23
Connecting the jumper cables................. 5-6
Cooling water pilot outlet..............2-12, 3-13
Crossing ................................................ 1-17
Cruising limitations .................................. 1-9

D

Docking the watercraft .......................... 3-31

E

Emergency procedures ........................... 5-4
Emission control information ................... 1-2
Engine break-in ..................................... 3-14
Engine compartment ............................... 3-6
Engine oil meter .................................... 2-23

Engine overheat warning indicator ........ 2-26
Engine overheat warning system .......... 2-17
Engine serial number .............................. 1-1
Engine shut-off cord (lanyard) ............... 3-12
Engine shut-off switch ........................... 2-10
Engine stop switch ................................ 2-10
Enjoy your watercraft responsibly ......... 1-21

F

Filling the fuel tank .................................. 3-3
Filling the oil tank .................................... 3-4
Fire extinguisher...................................... 3-9
Fishing vessel right-of-way.................... 1-18
Flushing the cooling system .................... 4-1
Front seat ................................................ 2-6
Front storage compartment ................... 2-27
Fuel and oil.............................................. 3-1
Fuel and oil systems ............................... 3-6
Fuel cock knob ........................................ 2-9
Fuel filter ............................................... 4-11
Fuel meter ............................................. 2-22
Fuel system ............................................. 4-4
Fuel tank ............................................... 4-11
Fuel tank filler cap ................................... 2-8
Fuel warning indicator ........................... 2-25

G

Gasohol ................................................... 3-2
Gasoline .................................................. 3-1
Getting to know your watercraft ............ 3-20
Give-way vessel .................................... 1-16
Glove compartment ............................... 2-29

H

Handgrip................................................ 2-16
Hazard information ................................ 1-13
Hood........................................................ 2-7
Hour meter ............................................ 2-24
Hull Identification Number (HIN).............. 1-1

I

Identification numbers ............................. 1-1
Important labels....................................... 1-3
Inspecting and adjusting the throttle 
cable...................................................... 4-13
Inspecting the battery ............................ 4-20
Inspecting the fuel system..................... 4-10

UF1F10.book  Page 4  Monday, September 3, 2001  9:26 AM

Summary of Contents for XLT800 WaveRunner 2002













































































































































Reviews:

No comments

Related manuals for XLT800 WaveRunner 2002

Kadey-Krogen Yachts 5814 Owner'S Manual preview
5814
Brand: Kadey-Krogen Yachts Pages: 449
Sailfish 290 CC Owner'S Manual preview
290 CC
Brand: Sailfish Pages: 44
Walker Bay AIRIS Owners & Safety Manual preview
AIRIS
Brand: Walker Bay Pages: 18
Moomba Craz Owner'S Manual preview
Craz
Brand: Moomba Pages: 72
Glacier bay 260 Canyon Runner Owner'S Manual preview
260 Canyon Runner
Brand: Glacier bay Pages: 50
Mercury Sport 240 Owner'S Manual preview
Sport 240
Brand: Mercury Pages: 42
Jeanneau CAP CAMARAT 925 WA Owner'S Manual preview
CAP CAMARAT 925 WA
Brand: Jeanneau Pages: 86
Jeanneau SUN ODYSSEY 44I Owner'S Manual preview
SUN ODYSSEY 44I
Brand: Jeanneau Pages: 138
TAKACAT T240G Owner'S Manual preview
T240G
Brand: TAKACAT Pages: 3
Axopar 24 HT 2016 Owner'S Manual preview
24 HT 2016
Brand: Axopar Pages: 39
Boston Whaler 235 Conquest Manual preview
235 Conquest
Brand: Boston Whaler Pages: 82
Sea-doo SEASCOOTER AQUA RANGER SD95001 User Manual preview
SEASCOOTER AQUA RANGER SD95001
Brand: Sea-doo Pages: 16
Hermes Yachting Alice Bavaria Cruiser 51 2016 Operation Manual preview
Alice Bavaria Cruiser 51 2016
Brand: Hermes Yachting Pages: 25
Baja Sportfish 250 Owner'S Manual preview
Sportfish 250
Brand: Baja Pages: 83
Hansa Sailing SKUD 18 Owner'S Manual preview
SKUD 18
Brand: Hansa Sailing Pages: 37
B&G X-35 Performance Manual preview
X-35
Brand: B&G Pages: 7
Navigator LP240BK User Manual preview
LP240BK
Brand: Navigator Pages: 26
BRIG Eagle 3.5 Owner'S Manual preview
Eagle 3.5
Brand: BRIG Pages: 38

Brands by name

Popular brands

Load more brands