Yamaha XLT1200 WaveRunner 2005, Owner'S/Operator'S Manual

Page: 43 / 136

2-17
E
EJU01329
Engine overheat warning
system
The model has an overheat warning
device. If the engine starts to overheat, the
warning light, indicator and “W.TEMP” on
the meter begin to blink and the buzzer
sounds intermittently. If this happens,
reduce the engine speed and return to
beach at low speed. If there is no water dis-
charge at the cooling water pilot outlet while
the engine is running, check the jet intake
and impeller for clogging.
WARNING
@
Before attempting to remove weeds or
debris from the intake grate or impeller,
shut the engine off and remove the clip
from the engine shut-off switch. Severe
injury or death could result from coming
in contact with the rotating parts of the
jet pump.
@
CAUTION:
@
This model is equipped with a catalytic
converter.
●
Return to shore at low speed if the
overheat warning indicator and buzzer
are on, and the display shows
“W.TEMP.” If you ignore these signals,
the engine will stop running and can-
not be restarted until the exhaust sys-
tem cools.
● Have your watercraft inspected and
serviced by a Yamaha dealer if the
engine stopped due to overheating.
@
UF0V14.book Page 17 Thursday, July 8, 2004 11:35 AM