Yamaha XJR1300T 2004, Owner'S Manual

Page: 38 / 90

PRE-OPERATION CHECKS
4-3
4
Control cables
• Make sure that operation is smooth.
• Lubricate if necessary.
6-21
Drive chain
• Check chain slack.
• Adjust if necessary.
• Check chain condition.
• Lubricate if necessary.
6-19, 6-20
Wheels and tires
• Check for damage.
• Check tire condition and tread depth.
• Check air pressure.
• Correct if necessary.
6-13, 6-15
Brake and shift pedals
• Make sure that operation is smooth.
• Lubricate pedal pivoting points if necessary.
6-22
Brake and clutch levers
• Make sure that operation is smooth.
• Lubricate lever pivoting points if necessary.
6-22
Centerstand, sidestand
• Make sure that operation is smooth.
• Lubricate pivots if necessary.
6-23
Chassis fasteners
• Make sure that all nuts, bolts and screws are properly tightened.
• Tighten if necessary.
—
Instruments, lights, signals
and switches • Check operation.
• Correct if necessary.
—
Sidestand switch
• Check operation of ignition circuit cut-off system.
• If system is defective, have Yamaha dealer check vehicle.
3-18
ITEM CHECKS PAGE
U5WM22E0.book Page 3 Tuesday, August 10, 2004 9:26 AM
ProCarManuals.com