Yamaha XJR1300, Owner'S Manual

Page: 75 / 102

PERIODIC MAINTENANCE AND MINOR REPAIR
6-30
6
2. Disconnect the headlight coupler,
and then remove the bulb cover.
3. Unhook the headlight bulb holder,
and then remove the defective
bulb.
EW000119
WARNING
_
Headlight bulbs get very hot. There-
fore, keep flammable products away
from a lit headlight bulb, and do not
touch the bulb until it has cooled
down.
_
4. Place a new headlight bulb into
position, and then secure it with
the bulb holder.
EC000105
CAUTION:
_
Do not touch the glass part of the
headlight bulb to keep it free from
oil, otherwise the transparency of
the glass, the luminosity of the bulb,
and the bulb life will be adversely af-
fected. Thoroughly clean off any dirt
and fingerprints on the headlight
bulb using a cloth moistened with
alcohol or thinner.
_
5. Install the headlight bulb cover,
and then connect the coupler.
6. Install the headlight unit by install-
ing the screws.
7. Have a Yamaha dealer adjust the
headlight beam if necessary.
1. Headlight coupler
2. Bulb cover 1. Headlight bulb holder 1. Do not touch this area.
E_5ea.book Page 30 Tuesday, October 2, 2001 3:54 PM