Yamaha XJ6SAP Owner'S Manual Download Page 78

Page: 78 / 102

PERIODIC MAINTENANCE AND ADJUSTMENT

6-32

EAUM1652

Lubricating the swingarm piv-
ots

The swingarm pivots must be lubricat-
ed by a Yamaha dealer at the intervals
specified in the periodic maintenance
and lubrication chart.

EAU23272

Checking the front fork

The condition and operation of the front
fork must be checked as follows at the
intervals specified in the periodic main-
tenance and lubrication chart.

To check the condition

Check the inner tubes for scratches,
damage and excessive oil leakage.

To check the operation

1. Place the vehicle on a level sur-

face and hold it in an upright posi-
tion.

WARNING! To avoid injury,

securely support the vehicle so
there is no danger of it falling
over.

[EWA10751]

2. While applying the front brake,

push down hard on the handlebars
several times to check if the front
fork compresses and rebounds
smoothly.

Recommended lubricant:

Lithium-soap-based grease

Recommended lubricant:

Lithium-soap-based grease

U1PWEAE0.book Page 32 Tuesday, February 7, 2012 4:21 PM

Summary of Contents for XJ6SAP







































































































Search results

Summary of Contents for XJ6SAP

Reviews:

Related manuals for XJ6SAP

Brands by name

Popular brands

Yamaha XJ6SAP, Owner'S Manual

Search results

Summary of Contents for XJ6SAP

Reviews:

Related manuals for XJ6SAP

Brands by name

Popular brands